Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Before
After
Before
After
Before
AfterFast, Reliable Roof Installation Across Burbank
Roof installation in Burbank runs $9,800 – $24,500 for a typical single-family home, depending on roof size, pitch, tear-off requirements, and whether your hillside street falls inside a Very High Fire Hazard Severity Zone. Most full replacements in Burbank take 3 – 7 working days once the city permit clears. If you’re wondering what your specific roof will cost, call us at (743) 200-8347 and we’ll walk you through it. We know Burbank’s permitting process, its housing stock, and its heat. That matters more here than in almost any other LA market.
Why Mercer Roofing Is Burbank’s Preferred Roof Installation Company
Burbank homeowners don’t call us because we’re the cheapest. They call because we do something most roofers won’t: we send you the technician’s name and photo before they arrive, and that person shows up in a marked uniform with a photo ID badge at your door. For a parent home alone with kids, or an older homeowner who’s been burned by a door-knocker before, that’s the difference between calling any roofer and calling us. Our Roof Installation team works this way on every single job. It’s not a special request.
We’re part of the Threshold Group family, founded in 2000. Every Mercer location is independently owned and operated, but every one is held to the same Threshold Verified standard: background-checked, identity-verified technicians on every visit. Grant Whitlock leads our team. He’s the person who makes sure the crew that knocks on your door is exactly who we said it would be.
Our written price comes before any work starts. Always. And every installation carries our 365-Day Done Right Promise: if something isn’t right within a year, we make it right. That guarantee is in writing, on every job, in Burbank and everywhere else we work.
Roof Flashing Installation in Burbank
Roof flashing installation in Burbank is the repair we do most often on 1940s – 1960s ranch homes, where the original metal at valleys, chimneys, and vent pipes failed long before the shingle surface did. Flashing is the metal material that seals the seams where your roof meets a wall, chimney, skylight, or valley. When it corrodes or lifts, water gets in at the joint and travels sideways before it ever shows up on your ceiling. In Burbank, a typical flashing repair or replacement runs $450 – $1,800, depending on how many penetrations the roof has and whether we need to pull shingles to reset the flashing properly.
Valley and penetration flashing on older Burbank roofs
Low-slope ranch rooflines concentrate water at valleys, and 60-year-old flashing wasn’t built for Burbank’s thermal cycling. We replace valley metal with pre-finished galvanized or copper, set it on new underlayment, and seal every penetration with a tested adhesive. That’s the fix that stops the ceiling stain two rooms away.
Flashing as part of a full Burbank re-roof
If we’re already tearing off your old roof, we replace all flashing as part of the job. It’s never a “while we’re up there” add-on. New shingles over corroded flashing is a known leak waiting two years to show itself, and Burbank’s heat speeds that timeline up.
TPO Roofing Installation in Burbank
TPO roofing installation in Burbank applies most often to low-slope sections of the city’s mid-century ranch homes, along with garages, additions, and a handful of flat commercial roofs. TPO is a white, heat-reflective single-ply membrane. In a city that routinely hits 100°F, that reflectivity matters: TPO roofs in Burbank consistently run cooler than dark asphalt surfaces, which reduces attic heat gain and slows UV degradation. A standard Burbank TPO installation runs $7,500 – $15,500, which typically includes tear-off, new insulation board, and full perimeter flashing.
Why Burbank buyers choose TPO on low-slope roofs
Asphalt shingles on slopes below 3/12 are a gamble. Water moves slower on low slopes and finds its way under shingle laps. TPO gets heat-welded at the seams into a single continuous sheet, which is what you want on a nearly flat 1950s Burbank roof that re-sloping isn’t practical for.
TPO and Burbank’s summer heat
The white membrane reflects more solar radiation, but Burbank heat still takes a toll on uninsulated roof decks. We inspect the decking and insulation below the TPO before laying the membrane. Soft plywood under a new TPO membrane means a failure you won’t see until the ceiling stains, so we show you what we find and price the repair before covering it.
Trusted Brands We Service in Burbank
We install and repair shingles from GAF, Owens Corning, and CertainTeed. These are manufacturer-recognized brands with documented Class A fire-rated assemblies, which matters a great deal in Burbank’s hillside VHFHSZ zones and matters generally in a city where fire weather is a real, recurring season. We stock common components locally for Burbank jobs, including matching ridge caps and starter strips, so a mid-project change doesn’t mean waiting a week on a freight shipment. If your home currently has an IKO or Atlas roof and you want comparable performance for a repair or sectional replacement, tell us what’s on the roof when you call and we’ll match the assembly, not just the color.
Common Roof Installation Problems We See in Burbank Homes
- Failed underlayment on low-slope ranches. The 1940s – 1960s ranch stock across Burbank was built before modern synthetic underlayment existed. Many of these roofs still carry their original felt, or a first-replacement layer that’s decades past its useful life. When we tear off, the underlayment is often brittle and cracked, and the decking beneath it has absorbed moisture. That’s a decking replacement, not a re-cover, and we show you photos before we proceed.
- Non-compliant wood shake on hillside streets. Homes climbing toward the Verdugos often still have original wood shake, which is banned for re-roofing under current VHFHSZ rules. If you’re in that zone and your old shake roof fails, the city requires a full material change to a rated Class A assembly. Homeowners told “we’ll just re-shingle it” by a contractor who hasn’t checked the zone are in for a nasty surprise at permit time.
- UV-cracked and curled shingles from Burbank’s valley heat. Burbank sits in the hot eastern San Fernando Valley, and its 100°F+ summer days attack first-replacement asphalt shingles hard. By the time a homeowner notices curling at the eaves, the decking under those shingles often has heat-related deterioration. Early replacement is almost always cheaper than waiting for the leak.
- Wind-uplift damage along the Verdugo gap. The gap between the Verdugo and San Gabriel ranges funnels Santa Ana winds straight across Burbank at high velocity, especially on hillside streets and north-facing slopes. We see shingles torn at the rake edges and lifted at the ridge from these events. Proper starter strip, proper nail pattern, and proper ridge attachment are what keep a new Burbank roof on during fire season.
Pricing for Roof Installation in Burbank, CA
A full tear-off and re-roof on a typical 1,400 – 1,800 sq ft Burbank ranch runs $11,500 – $18,000 with standard architectural shingles. Smaller bungalows in Magnolia Park can come in at $9,800 – $12,500. Hillside homes in the VHFHSZ jump higher, $16,000 – $24,500, because the assembly requires Class A materials, often steeper pitch work, and a slower inspection process through Burbank’s building department. TPO sections add $7,500 – $15,500 depending on size. Flashing-only work runs $450 – $1,800. Every job starts with a free inspection and a written, line-item quote before you commit to anything. Call (743) 200-8347 to schedule yours.
We Also Serve Cities Near Burbank
Our Burbank roofing crews also work in Glendale, North Hollywood, Studio City, and La Canada Flintridge. If you live in one of those cities and need roof installation, the same written-price, Threshold Verified process applies. Call us and we’ll send a technician whose name and photo you already have.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roof Installation in Burbank
Yes, if your home sits inside the California-designated Very High Fire Hazard Severity Zone that covers most of the Verdugo-adjoining hillside streets, current Burbank code requires a Class A fire-rated roof assembly, and the city’s standalone building department verifies this at permit time. That means replacing non-compliant wood shake with a rated Class A system, not a like-for-like swap. If you’re unsure of your zone, call (743) 200-8347 and we’ll check before you spend a dollar.
Because Burbank operates its own building department, separate from LA County, and it charges its own permit fees and enforces its own inspection schedule. The difference isn’t huge on flatland jobs, but on hillside VHFHSZ projects the Class A verification adds an inspection step and sometimes material documentation requirements that flatland or county-permitted jobs don’t face. We’ve pulled enough of these to budget the permit accurately from day one.
Burbank’s 100°F+ summer heat and landlocked valley position accelerate UV breakdown and thermal cycling on asphalt shingles, so we recommend shingles with documented high-wind and high-UV resistance ratings from GAF, Owens Corning, or CertainTeed, installed with proper attic ventilation. Heat is also why TPO is a strong choice on low-slope sections. The reflectivity cuts attic temperatures and extends the life of the decking below. We’ll show you options in your written quote, with real numbers for each.
Usually three things: failed or missing underlayment, soft decking at valleys and penetrations, and flashing that was installed wrong the first time. On a recent hillside re-roof off a street climbing toward the Verdugos, we found original wood shake, which had been banned for years under VHFHSZ rules, plus a low-slope section flashed wrong decades earlier. We rebuilt the valleys, reset the drip edge, installed new ice and water shield, and put on architectural shingles with a proper ridge vent to fix the attic ventilation the original build never had. That’s not a horror story to us; it’s a standard Burbank tear-off. But the way we handle it is different: we photograph everything, show you the photos, and price any added scope in writing before touching it.
We inspect before we write the quote, then write allowances into the contract for common Burbank-specific discoveries like decking replacement, failed flashing, and code-triggered material changes. If the tear-off reveals something we couldn’t have seen from the top, we stop, show you photo evidence, and get written approval on the added scope before proceeding. You never get a final invoice that looks nothing like the quote, and you never find out about a problem thirdhand. Call (743) 200-8347 for a free estimate and we’ll explain how allowances work on your specific roof.
One More Thing About Burbank Roofs
Burbank issues its own re-roof permits through a standalone city building department, not LA County, and hillside jobs in the Verdugo-adjacent VHFHSZ zones trigger a mandatory Class A assembly verification that inspectors specifically check for. Contractors accustomed to looser oversight in nearby unincorporated LA County pockets get caught here, and the homeowner pays for that in delays and change orders. We don’t get caught. We know Burbank’s inspectors, we know their checklist, and we build the permit and inspection process into the quote from day one. If you want a roof installed by people who understand exactly what your street requires, call (743) 200-8347 today. Your written quote is free, your price is fixed before work starts, and the technician who knocks on your door is someone you already know by name and photo.
Written by Grant Whitlock, Owner at Mercer Roofing, part of the Threshold Group family, serving Burbank since 2000.