Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Before
After
Before
After
Before
AfterHow Much Does Gutter Installation Cost in Los Angeles?
Gutter installation in Los Angeles usually runs $1,600 to $4,200 for a typical single-family home, with most one-story houses landing between $1,900 and $2,700. That covers materials, labor, hangers, and downspouts on a standard 150 to 200 linear-foot run. Two-story homes, custom fascia work, and seamless aluminum in harder-to-reach hillside lots push the number higher, sometimes past $6,000.
Where you sit in that range depends on roof height, how many downspouts you need, the material you choose, and how much old gutter and rotted fascia has to come off first. We’ll walk through each of those below with real Los Angeles numbers so you can compare quotes without guessing.
Key Takeaways
- Typical Los Angeles gutter install: $1,600-$4,200, with most homes around $2,300.
- Seamless aluminum is the most common choice here; copper costs roughly three times more.
- Bungalow and Craftsman homes in older LA neighborhoods often need new fascia before gutters go up.
- Written price before any work starts, from a live person at (743) 200-8347.
- Every install is covered by our 365-Day Done Right Promise.
Mercer Roofing handles Gutter Installation in Los Angeles and the roof work that goes with it, so you’re not chasing two contractors when your fascia and shingles both need attention.
Gutter Installation Cost Breakdown (2026)
Here’s what the line items actually cost in the Los Angeles market right now. Prices are per linear foot unless noted, and they assume a standard one-story home unless specified.
| Line Item | Typical Los Angeles Range |
|---|---|
| Seamless aluminum gutter (5″ or 6″) | $9-$16 per linear foot installed |
| Galvanized steel gutter | $8-$14 per linear foot |
| Copper gutter | $28-$48 per linear foot |
| Downspouts (per unit, installed) | $85-$220 each |
| Gutter guards / leaf screens | $6-$14 per linear foot |
| Fascia board replacement | $8-$18 per linear foot |
| Tear-off and disposal of old gutter | $200-$550 total |
| Hangers and hidden brackets | $3-$7 per linear foot |
| Two-story height surcharge | $400-$1,200 added |
So a 180-foot seamless aluminum run on a one-story home in, say, Encino typically totals around $2,100 with four downspouts and basic leaf screens. The same run on a two-story house in the Hollywood Hills with a steep pitch and limited ladder access can hit $4,800 because the labor climbs and we need extra safety setup.
Two things drive price up faster than anything else: height and old gutter removal. If your existing gutters are nailed directly into fascia that’s already soft or split, we can’t just hang new material over it. The fascia gets replaced first, then the gutter goes on. That discovery happens during the estimate, not after we’ve started, which is why we give you a written price before any work begins.
Repair vs. Replace: What’s the Math?
Small repairs like re-sealing a joint or re-pitching a sagging run cost $150 to $400. If your gutters are under 15 years old and the damage is isolated, repair is usually the smarter call. Once you’re past 20 years, or you’re looking at multiple leaks, separated seams, and rust-through in more than a few spots, replacing the run makes more financial sense. New gutter on a 180-foot home runs about $2,300, and patching piece by piece over five years often adds up to more than that with worse results.
What Affects Gutter Installation Pricing in Los Angeles
Nationally, gutter pricing is fairly flat. Here in LA, these six factors move the number more than anything else.
- Home height and access. A single-story bungalow in Highland Park is straightforward ladder work. A two-story Spanish Colonial in Los Feliz with mature olive trees crowding the roofline means extra rigging and slower progress. Height surcharges here run $400 to $1,200.
- Fascia condition and age of the house. Los Angeles has a deep inventory of 1920s Craftsman and 1930s Spanish homes. Their fascia is often original, and after decades of dry summers followed by the occasional wet winter like 2023-24, that wood is split and soft. Expect $800 to $2,000 in fascia replacement on older homes.
- Roof pitch and shingle condition. Steep-pitch roofs slow everything down. If the shingles are curling or the drip edge is loose, we deal with that during the gutter install rather than leaving a gap that sends water behind the new gutter.
- Material choice. Seamless aluminum is the LA standard because it won’t rust in coastal Santa Monica air and handles the inland heat in Sherman Oaks. Copper looks beautiful on historic homes but multiplies your cost by roughly three.
- Linear footage and downspout count. A 1,200-square-foot home usually needs 140 to 170 linear feet and three downspouts. A 2,800-square-foot home might need 240 feet and six downspouts, which is where the labor really adds up.
- Seismic and code considerations. California building code requires gutters to be securely fastened, and properly anchored hangers matter more here than in most states. We follow local code on hanger spacing and attachment; anything less and the first big winter storm will find the weak point.
Los Angeles rain is weird. Most of the year it’s dry, then a handful of atmospheric river storms dump two inches in a day. That pattern is exactly why undersized or poorly hung gutters fail here. We regularly see gutters in the Valley that survived five dry years and then pulled loose in a single January storm. Proper hanger spacing and correct downspout sizing aren’t upsells in this market, they’re the whole ballgame.
How to Save on Gutter Installation
A few practical ways to keep the number down without cutting corners on the parts that matter.
- Bundle gutter work with roof work. If your roof is also due, scheduling both in one visit saves setup, disposal, and access costs. A home project that combines a new roof and new gutter line is meaningfully cheaper than two separate visits.
- Skip heated gutters. We don’t get enough freeze events in Los Angeles to justify them. That’s a costs-you-money-for-nothing line item unless you’re up in the high desert.
- Choose aluminum over copper unless you have a genuine reason. Historic districts and high-end restorations sometimes warrant copper. Most homes don’t, and the savings are significant.
- Get leaf guards only where you need them. If you have a mature ficus or olive tree overhead, guards pay for themselves. If your roof is clear, skip them and save $6 to $14 per foot.
- Fix fascia rot early. Water damage spreads. A small section of soft fascia found this year is a fraction of the cost of a full replacement next year.
- Get a written, itemized estimate. Free estimates are standard, and an itemized one lets you see exactly where money is going. Call (743) 200-8347 and we’ll walk you through it live.
Why Homeowners Choose Mercer Roofing for Gutter Work
A pricing page is only useful if the number you get is the number you pay. That’s the part most gutter quotes get wrong, so here’s how we handle it.
We’re part of the Threshold Group family, founded in 2000, and every independently owned Mercer Roofing location operates under the Threshold Verified standard. In plain terms: every technician is background-checked, identity-verified, and arrives in a clean, marked uniform with a photo ID badge at your door. You also get their name and photo sent to you before they show up, so you know exactly who’s coming and have proof of it when they arrive.
Before any work starts, you get a written price. Not a range, not a “we’ll see once we get up there,” a locked number on paper. If we open the fascia and find something unexpected, we stop and talk to you before doing anything that changes the price. And every repair we do is backed by a written guarantee, with a free second visit included if the repair fails.
Our 365-Day Done Right Promise covers every install. If something isn’t right within a year, we make it right. That guarantee comes in writing, included with every job, and not conditional on anything.
On the phone you get a live person, any hour, day or night. Not a voicemail, not a call-back form. Real human. It’s a small thing until it’s 11 p.m. and a storm is coming in, and then it’s the whole thing.
For materials, we install and repair with shingle brands that include GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral, so whatever your roof is wearing, we can match the system correctly.
FAQs – Gutter Installation Cost
How much does gutter installation cost in Los Angeles?
Gutter installation in Los Angeles typically costs $1,600 to $4,200 for a single-family home, with a standard one-story house averaging around $2,300. Seamless aluminum is the most common choice. Copper runs roughly three times more. Call (743) 200-8347 for an exact quote, and the estimate is free.
Is it cheaper to repair or replace gutters?
For isolated damage on gutters under 15 years old, repair at $150 to $400 is cheaper. Once you’re past 20 years or dealing with multiple leaks, rust-through, and separated seams, replace. Full replacement typically runs $1,600 to $4,200, and patching repeatedly usually costs more over five years. A free estimate will tell you which side of that line you’re on: (743) 200-8347.
How long does gutter installation take?
A standard 180-foot seamless aluminum install on a one-story home takes one day, usually 5 to 8 hours. Two-story homes with fascia replacement run one to two days. Seamless gutter is formed on-site, so the run is cut to your exact roofline with fewer joints, which is why it holds up better in LA’s winter storms.
Do I need gutter guards in Los Angeles?
You need them if you have mature trees overhead, particularly ficus, olive, or pine. Guards add $6 to $14 per linear foot and cut cleaning frequency dramatically. If your roof is clear of overhang, guards are optional. We’ll tell you honestly at the estimate whether you’d get your money’s worth. Call (743) 200-8347 and we’ll look at your specific lot.
What’s the best gutter material for Los Angeles homes?
Seamless aluminum is the best all-around choice for LA. It won’t rust in coastal air like Santa Monica or Long Beach, it handles the inland heat in the Valley, and it costs $9 to $16 per linear foot installed. Copper is worth it on historic restorations but runs $28 to $48 per foot. If you’re not sure, a free estimate will give you both numbers side by side: (743) 200-8347.
Can you install gutters the same day I call?
Estimates are usually within a few days, and installations are typically scheduled within one to two weeks depending on material and access. If you have active water damage, call and we’ll triage it right away. Reach a live person at (743) 200-8347, any hour.
Getting a Real Number Before You Commit
Los Angeles gutter pricing comes down to four things: your home’s height, the condition of the fascia behind the old gutter, your linear footage, and the material you pick. Anything outside those is a detail. Get a written itemized estimate and you’ll know exactly what you’re buying before anyone climbs a ladder.
Call Mercer Roofing at (743) 200-8347 for a free estimate. A live person answers any time, day or night. You’ll get a written price before any work starts, and every install is covered by our 365-Day Done Right Promise. That’s the deal, in writing, every time.
Written by Grant Whitlock, Owner at Mercer Roofing, serving Los Angeles since 2000.
Pricing reflects the Los Angeles market as of 2026. Mercer Roofing offers free estimates – call (743) 200-8347.
What Our Customers Say
"Leak showed up in the hallway ceiling after a big storm. They found the failed pipe flashing in about ten minutes, replaced it, and checked the attic for wet insulation."
- Sophie R."Chimney flashing was the culprit for years of dark stains on the ceiling. Fixed it in one visit and no more stains."
- Ian O."Roofer showed his ID and gave me the crew lead's name before anyone climbed the ladder. Replaced a patch of missing shingles and resealed two vent boots. Written estimate matched the final bill."
- Brian J.