Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Before
After
Before
After
Before
AfterFast, Reliable Roof Installation Across Oakhurst
A full roof installation in Oakhurst runs $14,000 – $28,000 for a typical 1,200 – 2,200 square foot home using Class A composition shingles, and $22,000 – $45,000 for standing-seam metal. Those numbers reflect the High Fire Hazard Severity Zone requirements that govern every permitted roof in town. We work throughout the Oakhurst area weekly, from the neighborhoods off Road 426 up toward Deadwood and the Yosemite gateway, and our crews know what the Madera County inspectors look for before they sign off. If you’re pricing a roof that the Creek Fire era made urgent, call (743) 200-8347 and we’ll give you a written number before anyone climbs a ladder.
Key takeaways:
- Every Roof Installation in Oakhurst must meet Class A fire-rating and ember-resistant detailing under California HFHZ code, not just good practice.
- We send every job with a written scope and price before work starts, and any condition found under the old roof is priced in a signed change order before we touch it.
- Oakhurst’s freeze-thaw winters and 95°F summers mean we spec heavier underlayment and tighter flashing than a valley crew typically would.
Why Mercer Roofing Is Oakhurst’s Preferred Roof Installation Company
Oakhurst homeowners tend to ask two questions before they sign anything: who is actually coming to the house, and what happens if the roof fails a year from now? We answer both in writing. Every technician’s name and photo comes to you before arrival, and that person presents a photo ID badge at the door, in uniform. Grant Whitlock leads our roofing work across the Oakhurst service area, and the crews we dispatch here are background-checked and identity-verified under the Threshold Verified standard. That matters when you’re home alone or have kids in the house.
The second question is covered by the 365-Day Done Right Promise: if the installation isn’t right within a year, we return and make it right. That’s in writing, on every job, not a verbal assurance. We’re part of the Threshold Group family, founded in 2000, and each location operates independently under that same standard. A live person answers our phone 24/7, which means when a January freeze lifts flashing on a cabin near Bass Lake, you reach a human, not a voicemail.
Our familiarity with Oakhurst’s housing stock runs deep. We’ve torn open enough 1960s and 1970s cabins to know the pine-needle rot pattern before we see it, and we price for what the permit inspection will require, not just what the shingle bundle costs.
Roof Flashing Installation in Oakhurst
Roof flashing installation in Oakhurst is the difference between a roof that lasts twenty years and one that leaks after its second freeze-thaw winter. Flashing is the metal that seals the joints where your roof meets a chimney, a wall, a skylight, or a valley, and at 2,274 feet elevation, those seams take a beating. In Oakhurst, we spec stainless-steel valley flashing as baseline scope, because the ponderosa and sugar pine canopy drops a continuous, acidic needle mat into every valley on the roofline, and galvanized flashing corrodes through under that load.
What Oakhurst flashing failures look like
Older cabins along Highway 41 and back toward Deadwood often show lifting step flashing around chimneys after a hard winter. When that happens, water gets behind the shingle course and rots the decking from underneath. We replace the flashing, repair the decking only where it’s actually compromised, and reset the shingles with new sealant. The fix is not cheap when done right: a full chimney flashing replacement in Oakhurst typically runs $950 – $1,850, and valley metal replacement with stainless runs $22 – $38 per linear foot, material and labor included.
When to check your flashing
If you see dark streaks below the chimney, or the previous owner caulked the roof-to-wall joint with silicone, the flashing has already failed once. Oakhurst’s summer heat bakes sealant until it cracks, then the first autumn rain finds the gap. Our estimate for flashing work is free, and the written quote separates the flashing scope from the shingle scope so you see exactly what you’re paying for.
TPO Roofing Installation in Oakhurst
TPO roofing installation in Oakhurst is what we recommend for flat and low-slope sections: additions, porches, detached workshops, carports, and the occasional mountain-modern build that went with a low-pitch roofline. TPO is a heat-welded single-ply membrane, and in Oakhurst’s summer heat, the white surface reflects UV instead of absorbing it. That keeps the space below cooler and stops the thermal expansion that cracks older rolled asphalt in about four seasons. For a flat roof or a slope under 3:12, TPO in Oakhurst runs $8.50 – $14 per square foot installed, depending on insulation and decking condition.
TPO and the pine-needle problem
Flat and low-slope sections collect needles the same way valleys do, except on a flat roof, the needle mat just sits there. We install TPO with proper edge metal and recommend leaf guards or periodic blast-downs for Oakhurst roofs that sit under a dense canopy. A standing-water check is part of every TPO inspection we do here, because a sagging deck under a TPO membrane tells us the underlayment was gone long before the membrane went on.
Why TPO holds up in Oakhurst’s climate
The heat-welded seams are the real advantage. Freeze-thaw cycles punish glued and taped seams first, but a properly welded TPO seam is a single piece of plastic. For Oakhurst owners with a flat-roofed carport or an addition that leaked every winter, TPO is usually the last roof that section ever needs in our experience.
Trusted Brands We Service in Oakhurst
We install and service roofing systems from GAF, CertainTeed, Atlas, Tamko, and Boral, and we stock common components locally so an Oakhurst repair or installation doesn’t wait days on a valley parts run. For Oakhurst’s HFHZ requirements, we most often spec GAF Timberline architectural shingles and Atlas StormMaster products because their Class A fire ratings and ember-resistance documentation satisfy Madera County and most insurers on the first pass. When a customer wants a quieter roof or better impact rating, we bring CertainTeed or Tamko options alongside, and we’ll show you the fire-rating documentation in writing before you pick.
Common Roof Installation Problems We See in Oakhurst Homes
- Rotted OSB decking hidden under the original shake. The pine-needle mat packs valleys and gutters, holds moisture against the wood, and by the time the shake comes off, a third of the decking can be soft enough to push a screwdriver through. Oakhurst’s older cabins show this more than any housing stock we work on. A valley roofer often doesn’t price for it; we do.
- Lifting flashing after freeze-thaw winters. At this elevation, water gets under flashing, freezes, expands, and lifts the metal a fraction of an inch each winter. By spring, the gap is big enough for rain. Oakhurst roofs need heavier flashing details than what works in the Fresno Valley floor.
- Missing or blocked ridge venting. Many 1960s and 1970s Oakhurst cabins were built with no ridge vent at all, or with a ridge vent that’s now packed solid with needle debris. A roof that can’t breathe bakes from the inside in summer, cooking the shingle underside and shortening the whole system’s life. We include ridge venting in every Oakhurst installation because code now requires it on most replacements.
- Wood shake and wood shingle roofs that are now uninsurable. Dozens of Oakhurst properties still wear their original wood roofs from the 1970s, and most insurers in the Creek Fire aftermath will not renew those policies. The upgrade to Class A composition or metal is not cosmetic here; it’s the difference between a policy that exists and one that doesn’t.
Pricing for Roof Installation in Oakhurst, CA
Here are the real numbers we quote in Oakhurst, as of this year. A full tear-off and Class A composition shingle installation on a typical Oakhurst cabin runs $14,000 – $28,000 depending on square footage, pitch, and whether the decking underneath is still sound. Standing-seam metal runs $22,000 – $45,000. TPO on a flat addition or carport runs $8.50 – $14 per square foot. Decking replacement, when the rot shows up, adds $2.50 – $4.50 per square foot to the job, and we show that as a line-item allowance in the written estimate before we start, not as a surprise at the end. Flashing replacement, ridge venting, and ice and water shield through the valleys are all line items you’ll see in your quote. Call (743) 200-8347 and we’ll schedule a free estimate with the full written breakdown, no charge for the visit.
We Also Serve Cities Near Oakhurst
Our Oakhurst roofing crews also take work in nearby mountain and valley communities. We serve Madera, Fresno, Clovis, and Chowchilla, and the same written-price and Threshold Verified standard applies no matter which town the job is in. If you’re in a neighboring city and want a roof installation quote the Oakhurst way, call (743) 200-8347.
Serving Oakhurst, CA - Our Local Coverage Area
We’re based in the Oakhurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roof Installation in Oakhurst
Because Oakhurst sits inside a California-designated High Fire Hazard Severity Zone, Madera County requires a permit and final inspection for roof replacements, and the inspector verifies Class A fire-rated materials, ember-resistant detailing, and code-compliant decking and venting. A Fresno Valley roof sits outside that HFHZ, so the requirements genuinely are different. Skipping the permit in Oakhurst also voids most insurer requirements, and if the roof fails later, you have no inspection record to stand on. We pull the permit, schedule the inspection, and stand with you through the final sign-off. Call (743) 200-8347 for a free estimate that includes the permit scope.
Usually three things: rotted OSB decking from years of pine-needle acid sitting against the wood, failed flashing that’s been letting water into the roof-to-wall joints, and missing or blocked ridge venting. We tore the original wood shake off a 1974 A-frame off Road 426 near the Yosemite gateway and found exactly that pattern: a third of the decking was gone, the galvanized valley flashing was lifting, and the ridge had no venting at all. We replaced the decking, laid ice and water shield, set stainless-steel valley metal, and installed a full GAF Timberline Class A system with ridge vent. The decking replacement was priced in a signed change order before we touched it, and the roof passed both county inspection and the insurer’s ember-zone checklist. That’s how we handle every Oakhurst tear-off: inspect, document, price in writing, then work.
In Oakhurst, keeping the original wood shake is usually not a real option. Wood shake and wood shingle roofs are non-compliant with current HFHZ fire code, and most insurers in Madera County will not renew a policy on a home wearing one, especially after the Creek Fire. Even if the shake looks intact from the ground, the decking underneath is often the first thing to fail. A Class A composition or metal replacement costs more upfront than patching shake, but the patch leaves you with an uninsurable roof and no inspection record. Call (743) 200-8347 and we’ll walk you through what your insurer requires before you spend anything.
We treat needle management as baseline scope on every Oakhurst roof, not an upsell. That means stainless-steel valley flashing instead of galvanized, proper gutter guards where the canopy is heaviest, and a ridge vent that won’t pack solid with debris. We also do a decking inspection before the new roof goes on, because the needle mat has usually already started the rot by the time anyone looks. If the decking is still sound, we clean and treat it; if it’s not, the replacement is priced in writing before work starts. For Oakhurst homeowners under ponderosa or sugar pine, an annual blow-down after the fall needle drop adds years to any roof. Call (743) 200-8347 for a free needle-damage inspection with your estimate.
Yes. TPO roofing installation is one of our standard scopes for Oakhurst additions, carports, porches, and any flat or low-slope section under 3:12 pitch. We install heat-welded TPO systems with proper edge metal and insulation, and in Oakhurst’s summer heat, the white membrane reflects UV instead of absorbing it. For a flat-roofed Oakhurst cabin or addition, TPO runs $8.50 – $14 per square foot installed, and we include a standing-water check and decking inspection in the free estimate. Call (743) 200-8347 to schedule yours.
Need a roof installation in Oakhurst with a written price before the first nail? We serve the whole Oakhurst area, from Highway 41 up to Deadwood and over toward the Yosemite gateway, and we answer the phone 24/7. Call (743) 200-8347 for a free estimate, or to talk through what your permit inspection will require before you commit to anything. You’ll get a written breakdown, a named technician with a photo ID at the door, and the 365-Day Done Right Promise behind every roof we put on.
Written by Grant Whitlock, Owner at Mercer Roofing, serving Oakhurst and the surrounding Sierra foothills communities.