Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roofing Company Across Hemet
Mercer Roofing handles roof repair, replacement, inspection, and maintenance for homeowners across Hemet, CA. A typical roof repair in Hemet runs $350 – $1,200 depending on the issue, and a full roof replacement on a standard Hemet tract home usually falls between $9,500 and $18,000. We know the San Jacinto Valley’s heat, the Santa Ana wind patterns, and the specific ways roofs fail here, and we write every price down before work starts. Call (743) 200-8347 for a free estimate.
Key Takeaways
- Hemet’s 108°F summer highs and below-freezing winter nights cause thermal expansion that loosens tile ridge caps faster than in Murrieta or Temecula.
- Our Roofing Company team includes background-checked, photo-badged technicians whose names and photos are sent to you before they arrive.
- Every repair in Hemet includes a written guarantee and the 365-Day Done Right Promise: if it’s not right within a year, we make it right.
- Manufactured homes and mobile home parks make up a significant share of Hemet’s housing, so we do elastomeric roof-over coatings and metal panel systems, not just conventional shingle work.
- Written prices before work starts. Free second visit if a repair fails. Live person answers the phone 24/7.
Why Mercer Roofing Is Hemet’s Preferred Roofing Company
Hemet homeowners keep calling us for one reason: our technicians introduce themselves by name, with photo ID, at the door. Grant Whitlock leads our team with a simple rule: no one steps onto your property without you knowing exactly who they are. Every technician is background-checked, identity-verified, and uniformed under the Threshold Verified standard, which each independently owned location is contractually held to. The name and photo arrive on your phone before the truck arrives in your driveway.
We also understand what Hemet roofs actually go through. The San Jacinto Valley floor bakes roof-deck surfaces past 175°F in summer, then freezes them below 32°F on winter nights. That thermal cycling is why we spec materials and fastening patterns differently here than we would for a job in, say, Murrieta. Our crews know the tract-home streets west of State Street, the Domenigoni Parkway corridor, and the manufactured home communities scattered through the valley. When you call about a leak near Soboba Road or a loose ridge cap east of San Jacinto Street, we know what we’re likely to find before we even set the ladder.
Roof Maintenance in Hemet
Roof Maintenance in Hemet is not optional because the valley’s temperature swings actively work against your roof every single day. A standard maintenance visit in Hemet runs $185 – $350 for a single-story home, depending on roof size and pitch. During a maintenance call, we inspect for cracked or displaced tiles, damaged flashing at penetrations, failing underlayment at valleys, and granule loss on composition shingles. We also check for the ridge-cap mortar failure that Hemet’s concrete tile roofs develop after years of thermal cycling.
We recommend a maintenance inspection every 18 – 24 months in Hemet, and annually for homes in the older tract neighborhoods west of Palm Avenue where roofs are now 25 – 40 years old. The extreme heat alone causes sealants to dry out faster than manufacturers’ baseline expectations, and catching a small separation at a pipe boot costs a fraction of what a leaked-through drywall repair will.
Ridge Cap Re-Bedding and Re-Torching
This is the single most common deferred maintenance item we find across Hemet, especially in West Hemet and the Domenigoni Parkway corridor. The mortar that holds hip and ridge tiles in place simply dries out after 10 – 15 years of 100°F-plus days and freezing nights. Re-bedding and re-torching typically runs $600 – $1,400 for a standard Hemet tract home, depending on linear footage and access.
Underlayment and Flashing Checks
The original underlayment on many 1970s – 1990s Hemet homes is now at or past its lifespan, even when the tile or shingle layer still looks serviceable. During maintenance, we check exposed underlayment at eaves and valleys, re-seal penetrations, and verify the drip edge is still properly fastened. Catching underlayment rot before it spreads to the decking saves Hemet homeowners thousands on re-sheathing.
Roof Coating in Hemet
Roof Coating in Hemet is the right answer for two very common situations: manufactured homes with low-slope panel roofs, and flat or low-slope commercial-style residential additions. A silicone or elastomeric roof coating in Hemet typically runs $2.50 – $5.00 per square foot of prepared surface, which puts most single-section manufactured homes at $1,800 – $3,800 total. Coatings reflect a significant amount of the San Jacinto Valley’s radiant heat, reduce surface temperatures, and stop hairline cracks from turning into full leaks.
We see this every week in Hemet’s mobile home parks and manufactured home communities. The roof is structurally different from a stick-framed pitched roof, and it needs a different system entirely. Coating over a clean, primed surface extends the life of the existing panel roof by 10 – 15 years when done correctly, and it does not require a tear-off.
Elastomeric Coating Over Existing Panel Roofs
We prep the surface by cleaning and priming, seal penetrations and seams with fabric reinforcement, then apply two full coats of silicone or acrylic elastomeric. This is not a cheap recoat, it’s a system that bonds to the existing panel and moves with it through Hemet’s temperature swings. The result is a white, reflective roof that keeps the home noticeably cooler in summer.
Low-Slope Residential Coatings
For site-built homes with flat or low-slope sections over patios, garages, or additions, we apply roof coatings that fill and seal surface checking and prevent new cracks from opening. On these jobs, we check that the existing membrane is still sound first. Coating over a failed membrane is a waste of your money, and we’ll tell you that plainly.
Trusted Brands We Service in Hemet
We install and repair shingle systems from GAF, Owens Corning, Atlas, and Tamko, and we can match existing tile profiles on Hemet’s older concrete tile roofs. We keep common Hemet failure parts stocked locally: ridge-cap mortar, starter strip, pipe boot flashings, and wind-rated adhesives for tile re-setting. When a Santa Ana wind event lifts tiles off a roof near the Hemet Valley Mall, we can source replacements fast because we know which local supply yards carry matching profiles. No two-week wait on a special order when your underlayment is exposed.
Common Roofing Company Problems We See in Hemet Homes
- Hand-loose ridge caps on concrete tile roofs: Entire streets of 1970s – 1990s tract homes in West Hemet show caps that have gone 10 – 15 years without re-bedding. The mortar crumbles, the next big wind slides the cap out of line, and then water finds the gap.
- Warranty-voiding granule loss on hot composition shingles: Roof-deck temperatures over 175°F accelerate granule loss on shingles rated for lower thermal loads. We spec shingles with thermal ratings that actually match Hemet’s summer conditions.
- Santa Ana wind lifting at the eaves and rakes: The San Jacinto Valley funnels wind hard enough that standard nail patterns fail at starter strips and drip edges. We use higher nail counts and wind-rated adhesives on every Hemet reroof.
- Manufactured home roofs leaking at seams and penetrations: Mobile home parks are a major part of Hemet’s housing stock, and low-slope panel roofs fail at seams long before the panels themselves wear out. Elastomeric coating is usually the right fix, not a conventional tear-off.
Pricing for Roofing Company in Hemet, CA
Here’s what Hemet homeowners should expect to pay. Roof repair runs $350 – $1,200 for typical leak, flashing, or shingle issues. Roof maintenance is $185 – $350 per visit. Ridge cap re-bedding and re-torching on a standard tract home runs $600 – $1,400. Roof coating on a manufactured home runs $1,800 – $3,800, or $2.50 – $5.00 per square foot. Full roof replacement on a Hemet tract home runs $9,500 – $18,000 depending on size, material, and whether the existing underlayment needs full replacement. Specific factors in Hemet that move the price: tile profile matching on older roofs, wind-rated fastening upgrades, and the condition of the existing decking. The quote we write is the price you pay. No change orders. Call (743) 200-8347 for your free estimate.
We were called out to a 1970s single-level tract home near the Domenigoni Parkway corridor where the homeowner had watched three ridge tiles slide out of line over one windy spring. Our tech walked the roof and found hand-loose hip and ridge caps across the whole south slope, plus granule loss on the aging composition shingles underneath. The mortar had simply dried out after more than a decade of 100°-plus days and freezing nights with no re-bedding. We re-bedded and re-torched the ridge caps, replaced the cracked field shingles with architectural shingles, and re-set the starter strip and drip edge with wind-rated adhesive so the next Santa Ana event wouldn’t lift the edges. The homeowner got a written price before any work started and a written guarantee when the job was done.
We Also Serve Cities Near Hemet
Our service area covers Hemet and the surrounding valley communities, including San Jacinto, Homeland, Nuevo, and Winchester. If you’re in any of these areas and need roofing work, call (743) 200-8347 and we’ll schedule your free estimate. Dispatch and scheduling are coordinated from our Inland Empire office; crews serve Hemet locally.
Serving Hemet, CA - Our Local Coverage Area
We’re based in the Hemet area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roofing Company in Hemet
Hemet sits on the floor of the San Jacinto Valley, where summer highs regularly exceed 108°F and winter nights frequently drop below freezing. That thermal cycling expands and contracts the mortar holding ridge and hip caps in place, and after 10 – 15 years the mortar crumbles into powder. Murrieta and Temecula sit at lower elevation with less extreme daily temperature swings, so their caps stay bedded longer. Add Santa Ana winds funneling through the valley, and Hemet ridge caps simply fail faster. Call (743) 200-8347 if you suspect your caps are loose; we’ll inspect and give you a written price.
Your best option is usually an elastomeric roof-over coating, not a conventional tear-off. We clean and prime the existing panel surface, seal seams and penetrations with fabric reinforcement, and apply two coats of silicone or acrylic elastomeric. That runs $1,800 – $3,800 for most single-section manufactured homes in Hemet, and it extends the roof’s life by 10 – 15 years. If the existing panel is too far gone, we’ll tell you that straight and discuss metal panel systems as an alternative. Call (743) 200-8347 for a free coating assessment.
Start by putting the two scopes side by side. Are both bids replacing the underlayment, or is one just laying new shingles over the old felt? Is one bid re-bedding ridge caps and the other skipping it? In Hemet specifically, check whether each bid includes wind-rated fastening and thermally appropriate shingle ratings, because those two items are the difference between a roof that lasts and one that fails at year five. Also check whether the price is written and fixed before work starts. Then call (743) 200-8347 and we’ll walk you through our written line-item quote.
Look for shingles rated at least 110 mph, and preferably 130 mph, because the San Jacinto Valley funnels Santa Ana winds with enough force to lift standard-rated shingles at eaves and rakes. We also specify higher nail counts and wind-rated adhesives on the starter strip and drip edge, even on homes that don’t sit directly on the valley floor. These upgrades cost a little more upfront but they keep the roof on the house during the next big wind event. Call (743) 200-8347 for a written quote that includes the right wind-rated details.
Re-bedding and re-torching existing hip and ridge caps is considered a repair under California building code, and in most Hemet cases it does not require a permit because you are restoring the existing roof, not replacing it. The same applies to re-setting loose tiles and repairing flashing. If the work expands into a full roof replacement or structural decking replacement, then permits are required. We pull those permits and pass inspections when the scope requires them. Call (743) 200-8347 and we’ll tell you exactly what your specific job needs.
If you’re ready to have your Hemet roof inspected, maintained, repaired, or coated, call Mercer Roofing at (743) 200-8347. A real person answers 24/7, and the estimate is free. You’ll get a written price before any work starts, and a written guarantee when the job is done. Roofing Company in Hemet homeowners trust comes down to one thing: we protect the people inside the home first, and the roof second.
Written by Grant Whitlock, Owner at Mercer Roofing, serving Hemet and the San Jacinto Valley since 2000.






Before
After
Before
After
Before
After