Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Before
After
Before
After
Before
AfterFast, Reliable Roof Installation Across Lantana
Roof installation in Lantana, FL typically runs $14,500 – $28,000 for a full architectural shingle re-roof on an average single-story home, and $26,000 – $52,000 for a standing seam metal system built to coastal spec. Most Lantana jobs take 3 – 7 working days once materials land and the permit clears. The number that actually matters here isn’t the square footage, though. It’s what the salt air between the Atlantic and the Intracoastal has been doing to your fasteners, flashing, and decking for decades. We’ve pulled enough permits in Lantana to know that what gets quoted as a simple shingle swap often becomes a re-deck once the old nail pattern comes to light. Call (743) 200-8347 to schedule a free estimate, and we’ll tell you exactly what your roof needs before any work starts.
Why Mercer Roofing Is Lantana’s Preferred Roof Installation Company
Homeowners in Lantana keep calling us back because we don’t send a stranger to the door. Every technician’s name and photo gets sent to you before the visit. The person who shows up wears a clean uniform and a photo ID badge, and you check that badge before we step inside or set foot on a ladder. That’s the Threshold Verified standard we’re held to, and it matters in a town where people should never have to guess who’s on their property.
Grant Whitlock leads our Lantana roofing work, and our crews know the local housing stock: 1950s – 1970s CBS construction, flat and low-slope built-up roofs patched repeatedly, and old drip edge that Palm Beach County inspectors won’t close a permit on. We coordinate dispatch from our Miami office, but the crews you’ll see are local to Lantana and the surrounding Palm Beach County area. When you call (743) 200-8347, a live person answers. Not a voicemail. Not a callback form.
Shingle Roof in Lantana
A Shingle Roof in Lantana is the most common installation we do, but the salt-air exposure here changes what “standard” means. Architectural shingles from GAF, CertainTeed, Owens Corning, Atlas, and Tamko all perform well when set with the right hardware underneath. In Lantana, that means stainless or hot-dipped fasteners, not standard galvanized. A full architectural shingle re-roof in Lantana typically runs $14,500 – $28,000 depending on decking condition, slope, and whether we’re pulling off one layer or two.
When Lantana homeowners need shingle replacement
Rust streaks running down from ridge vents are a telltale sign in this town. The galvanized components corrode from year-round salt spray long before the shingle granules wear away. If your roof is pre-1994 CBS and hasn’t been re-decked, there’s a good chance the decking is fastened with 6d smooth-shank nails at wide spacing. That fails a Wind Mitigation inspection, and insurers won’t issue or renew coverage until it’s corrected.
What a Lantana shingle install includes
We strip to decking, correct the nail pattern to current FBC wind-mitigation standards, install a secondary water barrier in valleys and along penetrations, set architectural shingles with stainless fasteners, and finish with new drip edge and a ridge vent sized for salt-air flow. Every job includes a written price before work starts, and the 365-Day Done Right Promise in writing: if the work isn’t right within a year, we make it right.
Standing Seam Metal Roof in Lantana
A Standing Seam Metal Roof in Lantana is the long-game answer to coastal corrosion. These systems run $26,000 – $52,000 on most Lantana homes, and the price reflects marine-grade materials that hold up to salt spray far better than standard metal roofing spec. For a homeowner planning to stay put for 10 or more years, this is often the cheaper roof in the long run, because you’re not replacing corroded flashings and fasteners on a five-to-seven-year cycle.
Why the coastal spec matters
Standard metal roof systems use galvanized fasteners and clips. In Lantana, between the ocean and the Intracoastal, those components start showing rust bloom inside a few years. We specify stainless fasteners, hot-dipped clips, and marine-grade finishes on every standing seam install here. The panels themselves last decades, but it’s the hardware that fails first when salt air gets a vote.
Standing seam on older Lantana homes
Many 1960s CBS homes in Lantana still carry original flat or low-slope built-up roofs. Converting to standing seam usually means re-framing or adding a slope structure, so the quote reflects that scope. But the result is a roof that sheds water fast, meets current wind-mitigation code, and won’t need a patch every other hurricane season.
Trusted Brands We Service in Lantana
We install and repair roofs using manufacturer-recognized systems from GAF, Atlas, and Tamko, among others like CertainTeed, Owens Corning, IKO, and Boral. For Lantana customers, we stock local parts that match the homes we see most: stainless fasteners, hot-dipped drip edge, secondary water barrier rolls, and ridge vents sized for coastal airflow. That means less waiting on parts and a faster turnaround from permit approval to dry-in. Check out our full Roof Installation service page for more on how we approach different systems.
Common Roof Installation Problems We See in Lantana Homes
- Salt-eaten galvanized fasteners and ridge vents. The Intracoastal doesn’t have to be in your backyard for this to matter. Lantana’s narrow width between the ocean and the waterway means salt spray reaches every block, and galvanized hardware rusts through years before the shingles fail.
- Pre-1994 nail patterns that kill insurance coverage. Homes built before Florida’s post-Hurricane Andrew code overhaul often have decking fastened with 6d smooth-shank nails at 12-inch spacing. Wind Mitigation inspectors flag it, and insurers demand correction before they’ll bind or renew a policy.
- Flat and low-slope roofs with repeated patches. The original built-up roofs on 1950s – 1970s CBS homes in Lantana have usually been patched four or five times. By the time we open them, the substrate is deteriorated and the drip edge doesn’t meet current Palm Beach County code.
- Rust streaks and loose flashing from aluminum components. Standard aluminum flashing and ridge vents corrode fast in this salt environment, loosening seals around chimneys, skylights, and valleys. Homeowners often mistake the streaks for shingle failure when the real problem is the metal underneath.
Pricing for Roof Installation in Lantana, FL
Here are real numbers for the Lantana market, not national averages. Architectural shingle re-roofs run $14,500 – $28,000. Standing seam metal runs $26,000 – $52,000. What moves the price: whether the existing decking passes wind-mitigation inspection or needs a full re-deck to correct old nail patterns, how many layers need stripping, slope and accessibility, and whether we’re converting a flat roof to sloped pitch. Coastal-spec hardware, stainless fasteners, and marine-grade flashing add 8 – 15% over inland-spec pricing. That’s the honest difference between a roof that survives this environment and one that starts rusting in five years. Call (743) 200-8347 for a written, line-item estimate. It’s free, and it’s in your hand before any work begins.
We Also Serve Cities Near Lantana
Our crews cover the full Palm Beach County and South Florida corridor. If you’re searching for Roof Installation in Lantana, you may also be looking in Miami, Hialeah, Fort Lauderdale, or Pembroke Pines. We run the same coastal-spec standards in all of those markets, because salt air doesn’t stop at the county line. Call (743) 200-8347 and tell us which city you’re in.
Serving Lantana, FL - Our Local Coverage Area
We’re based in the Lantana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roof Installation in Lantana
Because pre-1994 CBS homes here were typically built with decking fastened by 6d smooth-shank nails at wide spacing, which fails the Wind Mitigation inspection Palm Beach County insurers now require. Once we strip the old shingles and the inspector sees that nail pattern, a full re-deck becomes the only way to close the permit and keep your coverage. That’s why our written estimates include a decking inspection before we finalize numbers. Call (743) 200-8347 for an exact quote after we look at your deck.
Yes. Lantana sits between the Atlantic and the Intracoastal, so salt spray reaches every neighborhood, not just oceanfront blocks. Standard galvanized fasteners corrode in this environment within five to seven years, causing rust streaks and loose flashing long before your shingles wear out. Stainless or hot-dipped hardware costs more up front but eliminates that failure cycle. We’ll put the price difference in writing so you can see exactly what coastal spec adds.
It means we specify stainless fasteners, hot-dipped clips, and marine-grade panel finishes instead of standard galvanized components. The panels themselves are the same high-quality steel or aluminum, but the hardware holding them to your deck is where coastal corrosion starts. On a Lantana home, the marine-grade hardware is what keeps the roof tight for decades instead of loosening after a few hurricane seasons. Call (743) 200-8347 and we’ll walk through the exact material schedule.
A square is 100 square feet of roof area, and it’s the unit every roofer in Lantana uses to price materials and labor. When you compare bids, ask for the price per square with the exact material schedule spelled out: shingle brand and rating, fastener type, underlayment, and decking included. That’s how you catch a cheap inland-spec quote that cuts corners on stainless hardware and secondary water barrier. Our written quotes break all of this down line by line.
Yes, it does. Lantana sits in the primary Atlantic hurricane impact corridor for Palm Beach County, and insurers here look for shingles rated for high-wind zones, typically Class H or ASTM D7158 Class H equivalent. The nail pattern and secondary water barrier matter as much as the shingle rating, since the Wind Mitigation inspection covers the entire assembly. A roof rated for the wind but nailed with the old 6d smooth-shank pattern still fails. We’ll spec the full assembly, not just the shingle box. Call (743) 200-8347 for a free estimate that covers all of it.
Written by Grant Whitlock, Owner at Mercer Roofing, serving Lantana and surrounding South Florida communities.