Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Before
After
Before
After
Before
AfterFast, Reliable Roof Installation Across Parkland
A full roof installation in Parkland typically costs between $18,000 and $45,000 depending on square footage, tile profile, and how much decking needs replacement once we pull the old roof. Most Parkland tear-offs and re-roofs take five to eight working days once permits clear and the HOA signs off on materials. If you’re seeing cracked tiles, granule loss in gutters, or water staining on ceilings, call us at (743) 200-8347. Grant Whitlock and our crews know Parkland’s tile-roof stock, its HOA rules, and its Everglades-side moisture problem better than any out-of-town outfit.
Why Mercer Roofing Is Parkland’s Preferred Roof Installation Company
Parkland homeowners call us because we do the unglamorous work most roofers skip. Before we touch a single tile on a Heron Bay or Watercrest home, we confirm the HOA Architectural Review Committee has approved the exact tile profile, color, and manufacturer. We’ve seen what happens when a contractor skips that step: a homeowner in Parkland Golf & Country Club paid for a full tear-off and re-install because the tile color was one shade off the approved palette. That’s a five-figure mistake we prevent in writing.
Our Roof Installation process in Parkland starts with a technician whose name and photo arrive on your phone before the visit. That person arrives in a clean, marked uniform and presents a photo ID badge at the door. We’re held to the Threshold Verified standard: background-checked, identity-verified, and trained to treat your property line as a boundary that matters. Every quote is written, line-itemed, and signed before work starts. No change orders without your written approval. No surprises.
Founded in 2000 and part of the Threshold Group family of home-service companies, Mercer Roofing backs every Parkland roof with a 365-Day Done Right Promise: if it’s not done right within a year, we make it right. Every repair carries a written guarantee with a free second visit if the repair fails. A live person answers our phone 24/7, so when a storm rolls through Parkland at 2 a.m., you get a real human on the line, not a voicemail.
Roof Flashing Installation in Parkland
Roof Flashing Installation in Parkland means replacing and sealing the metal barriers at every transition point on your roof: valleys, chimneys, skylights, vent pipes, and where tile meets a wall or a dormer. In Parkland’s tile-roof communities, the original galvanized or aluminum flashing from the 1980s and 1990s is often corroded through, and the old caulk joints have gone brittle from years of afternoon heat followed by Everglades-fed humidity. Flashing failures are the leading cause of leaks in Parkland homes where the tile itself still looks fine.
Valley and Chimney Flashing
Valley flashing carries the heaviest water flow on a Parkland roof, and chimney flashing takes the most thermal movement. When we replace either, we inspect the decking underneath before installing the new metal. In Watercrest, we’ve pulled flashing to find soft plywood that never would have been caught from the surface. Replacing valley flashing on a Parkland home typically runs $900 to $2,400 depending on linear feet and whether the surrounding tile must be lifted and reset.
Step Flashing on Tile-to-Wall Transitions
Step flashing is the series of small L-shaped metal pieces tucked where roof tile meets a vertical wall. On Parkland’s two-story homes, these transitions are everywhere: front entry porticos, side walls, and second-story pop-outs. When step flashing fails, water wicks behind the stucco and rots framing long before you see a ceiling stain. A step flashing replacement on a typical Parkland tile-to-wall junction runs $600 to $1,800 per wall, depending on height and access.
TPO Roofing Installation in Parkland
TPO Roofing Installation in Parkland applies almost entirely to flat or low-slope sections: patios, pool-deck covers, second-story flat areas, and the occasional flat-roof addition on older homes. TPO (thermoplastic polyolefin) is a heat-welded single-ply membrane that reflects UV and holds up well to Parkland’s intense sun and daily afternoon storms. On a typical Parkland flat section of 400 to 800 square feet, TPO installation runs $6,500 to $12,000 including tear-off of the old membrane, new insulation where needed, and heat-welded seams.
Pool Deck and Patio Covers
Parkland homes are built for outdoor living, and a surprising number of those pool-side flat roofs have the original torch-down or built-up membrane from the mid-1990s. That material shrinks and cracks in the Broward sun, and seams open up just enough for water to pool and worm through to the plywood. TPO solves this with welded seams that don’t rely on adhesive to stay watertight.
When TPO Beats Coating
Some Parkland homeowners ask about roof coatings, and there’s a place for them, but a coating can’t fix a membrane that’s already split or pulling away at the edges. If your flat roof has visible cracks, bubbles, or standing water that doesn’t drain within 48 hours after a storm, coating is a temporary bandage. TPO is a real fix. We’ll tell you straight which one your roof actually needs, and the written estimate covers either path.
Trusted Brands We Service in Parkland
We install and repair roofing systems from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. For Parkland’s tile-heavy housing stock, we know which manufacturers’ S-tile and barrel profiles match the approvals on file with Heron Bay and the city’s other HOA associations. We don’t push one brand over another. We match the manufacturer to your HOA’s approved list and your wind-zone requirements, then put the exact material names, colors, and product numbers in your written quote so the HOA can approve it on the first pass.
Common Roof Installation Problems We See in Parkland Homes
- Rotted decking hiding under intact tile. Parkland’s western neighborhoods sit against the Everglades Water Conservation Area, and that constant humidity keeps plywood decking damp for months at a time. By the time we pull original 1990s concrete S-tile in Watercrest or Parkland Golf & Country Club, the felt underlayment has often turned to dust and the decking underneath is soft and delaminated.
- HOA non-compliance forcing re-dos. Every major Parkland HOA requires Architectural Review Committee pre-approval of tile profile, color, and manufacturer. Contractors who skip this get homeowners stuck with a new roof they have to tear off and redo. We handle the ARC paperwork before we schedule a single day of work.
- Pre-1994 homes missing hurricane strapping. A significant portion of Parkland homes predate the 1994 Florida Building Code overhaul. When we open those roofs, we often find no hurricane strapping and fastening that fails current High-Velocity Hurricane Zone standards. The permit process triggers these upgrades, and we write the cost into your contract upfront as an allowance so it doesn’t ambush you mid-job.
- Valley and flashing rot from afternoon storm cycles. Parkland gets daily convective storms in summer, and water funnels hard through valleys and against flashing. That repeated soaking and drying rots decking and corrodes flashing at a rate you don’t see in eastern Broward cities.
Pricing for Roof Installation in Parkland, FL
Here’s what Parkland homeowners can expect, with real numbers. A full concrete or clay tile tear-off and re-roof on a 3,000-square-foot single-story home typically runs $24,000 to $38,000. A two-story of the same footprint runs $32,000 to $45,000, mostly due to staging and safety requirements. Decking replacement, when needed, adds $2.50 to $4.50 per square foot of replaced plywood. HOA-required tile profile upgrades, permit fees, and any hurricane strapping work add to the total. Every Mercer quote is written, itemized, and fixed before we start. No change orders without your signature. Call (743) 200-8347 for a free estimate, and Grant Whitlock will make sure the numbers are explained in plain English.
We Also Serve Cities Near Parkland
Our crews cover all of Parkland and the surrounding area, including Coral Springs, Coconut Creek, Boca Raton, and Margate. If you’re in a nearby city with the same tile-roof and HOA conditions, the same inspection-first, written-allowance process applies. Dispatch and scheduling coordinate from our Miami office, but the crews working on your roof live and work right here in the Broward corridor.
Serving Parkland, FL - Our Local Coverage Area
We’re based in the Parkland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roof Installation in Parkland
Yes, and this is non-negotiable. Every major Parkland HOA, including Heron Bay’s master association, requires the Architectural Review Committee to pre-approve tile profile, color, and manufacturer before any roofing work begins. Installing a non-approved color, even a close match, has forced Parkland homeowners into full tear-offs at their own expense. We handle the ARC paperwork for you and get written approval in hand before demolition starts. Call (743) 200-8347 to start the process, and we’ll walk you through exactly what your HOA requires.
Because Parkland’s western edge sits directly against the Everglades Water Conservation Area, and that wetland humidity keeps the plywood decking and felt underlayment damp far longer than in eastern Broward. The concrete or clay barrel tiles on top still look intact, but the felt underneath has disintegrated and the wood is soft. In Watercrest, we tore off original 1990s S-tile to find the felt reduced to dust and plywood delaminated across roughly four squares near the valleys. That’s Everglades-side moisture damage, and it’s the single biggest reason a Parkland re-roof quote moves once the roof is open. We write a decking allowance into every Parkland contract so you know the worst-case number before we start.
One square equals 100 square feet of roof area, measured across the actual roof surface, not the home’s floor area. A 3,000-square-foot home with a moderately pitched roof might measure out to 34 to 40 squares of roofing. Decking replacement is priced per square foot, so if we find 400 square feet of rotted plywood, that’s four squares of decking at the rate written in your contract. Every Mercer quote defines these terms in writing, so nothing on the invoice reads like a foreign language. Call (743) 200-8347 and we’ll explain your specific roof’s square count on the free estimate.
Yes, when they’re installed to the manufacturer’s high-wind spec with the correct fastening pattern and a product-approved underlayment. Parkland sits fully within the Broward County High-Velocity Hurricane Zone, so any shingle system must meet Florida Product Approval standards for uplift resistance. However, the vast majority of Parkland homes are HOA-mandated tile, not shingle. If your HOA allows shingle and you choose architectural, we install GAF, CertainTeed, or Owens Corning systems rated for the HVHZ, with the paperwork to prove it.
We inspect first, and we write allowance lines into your contract before we pull a single tile. If we open a pre-1994 Parkland roof and find missing hurricane strapping, rotted decking that extends further than expected, or damaged framing, we document it, price it in writing, and get your signed approval before we fix it. The permit stays open through inspection, and every change order is itemized. You never hear about a cost after it’s already installed. That’s how Grant Whitlock runs every Parkland job, and it’s why homeowners who’ve been burned by surprise-change-order roofers stay with us. Call (743) 200-8347 for a free estimate, and we’ll put the process and the numbers in writing before you commit to anything.
Written by Grant Whitlock, Owner at Mercer Roofing, serving Parkland and the surrounding Broward communities.